AEROSYS DOWNLOAD, INSTALL and PASSWORD REQUEST

Description

Following are the instructions on downloading, installing and requesting passwords for the AeroSys aerial triangulation adjustment software. The AeroSys software is the adjustment engine for the Vr Aerial Triangulation package VrAt. If you wish to evaluate the AeorSys adjustment software with Vr Aerial Triangulation the software may be downloaded and installed and will adjust up to eight photographs without a password. With a password up to 2000 photos may be adjusted in a single block.

Information about configuring AeroSys can be found at “AeroSys Settings”.

Download the AeroSys Software Disks

From the http://aerogeomatics.com/aerosys/software/ web page select the latest version to download and move into that folder. In this example the AeroSys_v7_OEM version is used. In the AeroSys_v7_OEM folder download six disk files and place them in a temporary folder. Please note the file names will be different depending on the version being downloaded and installed. The files in this example are named:

AeroSys_v72_OEM_12JUN2006_Disk_1.zip

AeroSys_v72_OEM_12JUN2006_Disk_2.zip

AeroSys_v72_OEM_12JUN2006_Disk_3.zip

AeroSys_v72_OEM_12JUN2006_Disk_4.zip

AeroSys_v72_OEM_12JUN2006_Disk_5.zip

Unzip the Disk files and place the extracted file in a separate folder or the same temporary folder the .zip files were placed.

Install the Software

Run the Setup.exe program and follow the installation instructions. The folder AeroSys will be created containing the necessary files.

Obtaining Information for a Password Request

Move into the \AeroSys\asw30\bin folder and run the AeroSysX.exe program. The following dialog box should appear.

Place the mouse cursor in the dialog box and press the right mouse key. From the pop-up menu select Register and the following dialog box will appear.

E-mail the Machine ID to Cardinal Systems and the User Name and License Key will be returned to unlock your version of AeroSys. When the User Name and License Key is returned it must be entered exactly as shown. It is best to cut and paste this information from the return e-mail into the dialog box to avoid mistakes.

To exit the AeroSysX program right mouse click and select Quit -> Exit from the menu.