VrOne

ON-LINE REFERENCE DOCUMENTATION

CARDINAL SYSTEMS, LLC

386-439-2525   

www.cardinalsystems.net   
 

DXF OUT (DxfOut)

 

Type: Translator

 

Translates VrOne file(s) to DXF (Drawing Exchange Format).

 

The DXF format is commonly used to translate map data to Autodesk’s AutoCAD program.  Due to the popularity of the format, it is used by many other CADD and GIS (Geographic Information Systems) systems for the transfer of map vector data.  From GIS to civil engineering systems, DXF is considered the de-facto standard for moving vector data.  Experience has shown that DXF is well suited to move vector data to the ARC INFO GIS system.

 

The DXF format is not without some problems when dealing with map data.  While symbols and text translate very easily, three-dimensional and fonted (patterned) lines do not.  These map features require some additional options.

 

The VrOne DXF Out translator is very flexible and offers many options for translating VrOne map data to AutoCAD.

 

Each symbol definition in VrOne may be translated to DXF in one of four different ways.  It may be translated as a Block, exploded, placed as text, or translated as a DXF point.  Symbol names may also be cross-referenced to a client’s block library and a scale factor may be applied to adjust the size. 

 

Each VrOne line font may be translated to DXF in one of four different ways.  It may be translated to a DXF line style, exploded, use a symbol line, or be translated using DXF bulges.

 

Because of the many options offered by DXF Out, you should communicate with your client to discuss the options and determine the best translation method to suit their needs.  Time should be spent familiarizing you with the options offered and test translations should be done to AutoCAD to view the translation results.  Dxf Out can translate map data using very basic translation parameters, which will produce lines with no line fonting, or advanced translation options may be used to produce a readable and usable map for your client.

 

This documentation will point out the advantages and disadvantages to many of the translation options.

 

AutoCAD is a registered trademark of Autodesk Inc.

 

Load Parameters

Record Parameters

Init Parameters

Edit Parameters

Edit Layer Table

Edit Dxf line types

Edit Symbol Lines

Cross Reference Line fonts

Cross Reference Symbols

Cross Reference Text Fonts

Load CADMAP Parameter File

Translate

Quick Translation

Translation Hints

 

 

DXF Out

 

Load Parameters

Loads previously recorded DXF Out (.dxo) parameter file.

Record Parameters

Records current translation parameters to a DXF Out (.dxo) parameter file.

Init Parameters

Initializes translation parameters to default values.  NOTE: Current translation parameters will be lost.

 

Edit Parameters

Allows editing of general translation parameters.

 

 

Translation Mode?

Determines how DXF files will be written.

Single File

All entities will be written to a single output file. The Dxf file name parameter must be filled in when using this option.

One File Per Workspace

A separate DXF file will be created for each open workspace. The DXF filenames will be the same as the workspace name with a .dxf extension. The Dxf file name parameter is ignored. The output directory will be used to determine where the files are placed.

One File Per Feature Code

A separate DXF file will be created for each unique feature code. All entities that have the same feature code will be written to the same DXF file, with the DXF file name being the same as the feature code value. The output directory will be used to determine where the files are placed.

One File Per Layer Output Name

A separate DXF file will be created for each unique layer output name in the layer cross-reference table. All entities that have the same output layer name will be written to the same DXF file, with the DXF file name being the same as the output layer name. The output directory will be used to determine where the files are placed.

One File Per VrOne Layer Name

A separate DXF file will be created for each unique layer name in the VrOne layer table. All entities that have the same VrOne layer name (not related to the output layer) will be written to the same DXF file, with the DXF file name being the same as the VrOne layer name. The output directory will be used to determine where the files are placed.

 

 

Dxf file name

File name to write DXF translated data to.  If this file exists, it will be overwritten.

 

Output directory

Output directory to place DXF files if not using Single File translation mode. If left blank, then files will be placed in the same directory as the VrOne files.

 
Workspaces to consider

When translating VrOne data to a DXF file this parameter defines the workspaces to use.  Options are “Current only” or “All open”.  When “All open” is used all open workspaces will be translated into a single DXF file.

 

AutoCAD release

Defines the AutoCAD release format to use when translating.  Options are 9, 10, 11, 12, and 13.  Currently, AutoCAD Release 14 and AutoCAD 2000 support files written in Release 13.

 

File dimension

This parameter determines the method to translate elevations to DXF.  It is possible to override this option per layer by using the Layer Table cross-reference dialog. Options are:

 

2D

 2 dimension DXF file.

3D

 3 dimension DXF file. Polylines will be created as 3d polylines.

3D/2D Polylines+Z

 3 dimension DXF file.  Polylines will be created as 2d polylines with an elevation in the header and elevations on each vertex.  NOTE: AutoCAD might change the line to make the line point elevations the same.

3D/2D Polylines+Thick

 3 dimension DXF file.  Polylines will be created as 2d polylines with an elevation in the header and elevations on each vertex.  Elevations will be placed as thickness in the polyline header and on each vertex.  NOTE: AutoCAD might change the line to make the line point elevations the same.

In some versions of AutoCAD operations such as joining lines is not allowed on 3D lines in which the elevation of the line points were not the same.  The last two options are variations on the 3D option.

 

File accuracy for XYZ

The number of places to the right of the decimal point for the coordinate positions written to the DXF file is defined by this parameter.

 

Define line types

Defines how line types will be referenced in the DXF file.  Each DXF file has a layer table that defines a layer name, the layer line type and the layer color.  Options are:

 

By layer

If a line type is used, the line type definition is not placed with the entity and the line type definition in the layer table is used.  Using this setting makes all the lines using line types on a layer use the same line type definition.

By entity

If a line type is used, the line type definition is placed with the entity and the line type definition in the layer table is ignored when drawing the entity.  This allows multiple line type definitions to be used within a layer.

 

Define colors

Defines how colors will be referenced in the DXF file.  Each DXF file has a layer table that defines a layer name, the layer line type and the layer color.  Options are:

 

By layer

The color definition is not placed with the entity and the color definition in the layer table is used.  Using this setting makes all entities on a layer the same color.

By entity

The color definition is placed with the entity and the color definition in the layer table is ignored when drawing the entity.  This allows multiple colors to be used within a layer.

 

Arc mode

VrOne supports lines that are defined as arcs.  This parameter defines the method to translate these arcs.  Options are:

 

Stroke

Individual arc points are placed in the DXF file.  Advantages: If the file is three-dimension, the Z dimension is represented more accurately.  Disadvantages: The DXF file is larger.

DXF Arc

The arc is broken out of the VrOne line and translated as a DXF arc.  Advantages: DXF arcs are created and may be edited by the client.  Disadvantages: If the file is three- dimension the elevation is not represented well along the arc. 

DXF Bulge

The arc is broken out of the VrOne line and translated as a DXF bulge.  Advantages: DXF bulges are created and may be edited by the client.  Disadvantages: If the file is three-dimension the elevation is not represented well along the arc.

 

Output file

VrOne can write DXF file in ASCII (text) format or DXF binary format.  The two formats are the same with the binary format taking less disk space.  If disk space is not an issue on your computer it is suggested that the ASCII format is used.

 

Output line mode

Lines may be written as DXF polylines or DXF lines.

Lines

Lines – Each VrOne line is broken into line segments and each line is written as two coordinate positions.  This option is very seldom used.  Advantages: Useful only if the target systems do not understand DXF polylines.  Disadvantages: Requires almost twice the disk space per line.

Polylines

Polylines – DXF polylines are used when ever possible.  This option should always be used unless the target system does not understand DXF polylines.

 

DXF point display mode

It is possible to cross a VrOne symbol to a DXF point during translation.  AutoCAD allows only one graphic representation for a point and this parameter defines this representation.  Points are often used to translate DTM (Digital Terrain Model) XYZ points to systems that do not understand DXF blocks.  Normally the VrOne X symbol is cross-referenced to a DXF point definition 3, which is shown graphically as an X. There are twenty possible settings for the point display mode but only one is active in a DXF file.  If there are no symbols cross-referenced to DXF points in “Cross Reference Symbols” then this parameter is ignored during translation.

 

DXF point display radius (in|mm)

It is possible to cross a VrOne symbol to a DXF point during translation.  AutoCAD allows only one graphic representation for a point and this parameter defines the display radius for the point.  This parameter is entered as inches or millimeters at target scale.  Points are often used to translate DTM (Digital Terrain Model) XYZ points to systems that do not understand DXF blocks.  Normally the VrOne X symbol is cross-referenced to a DXF point definition 3, which is shown graphically as an X.  If there are no symbols cross-referenced to DXF points in “Cross Reference Symbols” then this parameter is ignored during translation.

 

Global Block Scale

This is scale factor that will be applied to all symbols that have a cross reference scale factor of  -1.0. This allows a translation to be made where all blocks in the DXF have a uniform scale factor regardless of the symbol sizes in VrOne.

NOTE: The Reset Symbol Scale Factors can be used to quickly set all symbols cross references to use a scale factor of –1.0.

 

Write entities Section only

If set to yes, then only the entities section of the DXF will be written. This eliminates all header information such as Layer tables, Linestyle tables, and Block definitions from the DXF files. This can be useful in some versions of AutoCAD where an existing drawing can be used when importing a DXF file. In this situation, all of the existing block definitions and layer table settings in the current AutoCAD drawing remain intact.

 

Turn unused layers off

Each DXF file has a layer table that defines a layer name, the layer line type and the layer color.  If this parameter is set to yes then only layers that are used in the VrOne file(s) will be placed in the layer table.  Since VrOne allows 10,001 layers, if this parameter is set to no then 10,001 entries will be placed in the DXF layer table.

 

Write unused blocks

Each DXF file has a block table that defines all of the blocks that will be used in the drawing. If this parameter is set to No then only blocks that are used in the DXF file(s) will be placed in the block table.  If set to Yes, then all blocks defined in the current Symbol file will be written to the block table, regardless of whether they are used or not.

 

Source for block definitions

Normally the DXF Out translator reads a VrOne symbol file and creates DXF blocks to represent symbols.  There may be times in which the client has defined their own block library and wishes you to cross-reference the VrOne symbols to their blocks. Options are:

 

VrOne symbol file

VrOne symbol definitions are read and DXF blocks are created.

Other DXF file

The blocks from another DXF file are copied to the DXF file being created by this translator. 

 

Notes on using “Other DXF file”:

 

Other DXF file for Block definitions

If the “Source for block definitions” is set to “Other DXF file” then this parameter defines the DXF file that contains the block definitions to copy to the current DXF file.  The […] browse button may be pressed in this field, which allows browsing for the target DXF file.

 
Symbol library

Allows an alternate symbol library to be used during the translation. If this is left blank then the currently attached symbol library will be used. If a VrOne symbol library is specified, the symbol definitions from the specified library are used during the translation.

Edit Layer Table

AutoCAD uses a layer table, which defines layer names.  Within each layer a line type, color and display status (on/off) are stored.  The VrOne DXF Out translator creates this table and places it in each DXF file created.

 

VrOne uses layer numbers and has 10,001 predefined layers.  AutoCAD uses layer names.  Each layer name may be up to 32 characters in length.  It is possible to name layers in VrOne but the names are only for reference and VrOne references all layers by number.

 

An easy way to define this table is supplied by using the “Add VrOne Layers to Layer Table” option.  This scans the current VrOne file(s) and creates a layer table entry for each layer used.  NOTE:  If layer names have been defined in VrOne then those layer names will be used in the table.  If a layer name has not been defined in VrOne then the layer number will be used with the word “Layer” before the number.

 

 

The Edit DXF Layer Table dialog box allows editing of the DXF layer table.  If  “Define line types” is set to “By entity” in Edit Parameters then the Line Type definition in this table is ignored and may be left CONTINUOUS.  If “Define colors” is set to “By entity” in Edit Parameters then the Color definition in the table is ignored and may be set to 1.  All layers should be tuned on.  The layer table may also be edited in AutoCAD.

 

VrOne Layer

This parameter specifies the VrOne input layer.

 
Dxf layer name

This parameter specifies the DXF layer name that will be used for entities in the current VrOne Layer.

 

Dxf line type name

This parameter specifies the DXF line type name that will be used for entities in the current VrOne Layer.

 

Dxf color

This parameter specifies the DXF color that will be used for entities in the current VrOne Layer.

 

Dxf layer on

This parameter specifies if the current VrOne Layer will be translated or not.

 

Dxf dimension

This parameter determines the method to translate elevations to DXF for the current VrOne layer.  Options are:

 

Default

Use whatever value is specified in the main parameters dialog.

2D

 2 dimension DXF file.

3D

 3 dimension DXF file. Polylines will be created as 3d polylines.

3D/2D Polylines+Z

 3 dimension DXF file.  Polylines will be created as 2d polylines with an elevation in the header and elevations on each vertex.  NOTE: AutoCAD might change the line to make the line point elevations the same.

3D/2D Polylines+Thick

 3 dimension DXF file.  Polylines will be created as 2d polylines with an elevation in the header and elevations on each vertex.  Elevations will be placed as thickness in the polyline header and on each vertex.  NOTE: AutoCAD might change the line to make the line point elevations the same.

In some versions of AutoCAD operations such as joining lines is not allowed on 3D lines in which the elevation of the line points were not the same.  The last two options are variations on the 3D option.

Edit Dxf line types

If any VrOne line fonts are to be cross-referenced to DXF line styles, this dialog may be used to create DXF line styles.  By definition DXF line styles consist of lines as dashes but are useful when defining VrOne line fonts that are dashed lines.  Up to 60 line styles may be defined.  Advantages: DXF lines styles allow the client to edit lines and make the map more readable.  Disadvantages:  If line points are closer than the line style distance then the line may be drawn as solid in AutoCAD.

 

 

In the above dialog box only the CONTINUOUS line style is defined and represents a solid line.  The line styles defined here may be cross-referenced to VrOne line fonts in “Cross Reference Line Fonts”.

Edit Symbol Lines

While not a feature of AutoCAD or VrOne it is possible to create special line types called symbol lines.  A symbol line is a line with DXF blocks placed at user-defined intervals along the line.  Symbol lines offer mapping symbolization and give the client editing capability in AutoCAD.  After a symbol line has been created it may be cross-referenced to a VrOne line font in “Cross Reference Line Fonts”.

 

 

Symbol Lines

This list box displays the current symbol lines that have been defined.  An entry of Empty means the symbol line has not been defined.  Clicking an entry will copy the settings to the edit fields where they may be changed.

 

Name

The name of the symbol line may be entered here.  This name will be available in “Cross Reference Line Fonts”.

 

Symbol spacing (in|mm)

Distance to place the symbols along a line.  This parameter is entered in inches or millimeters at target scale.

 

Symbol radius (in|mm)

Defines the size of the symbols that are placed along the line.  This parameter is entered in inches or millimeters at target scale.

 

Center Symbols along length of line

If this is on, then placement of symbols will be adjusted so that the first and last symbols placed are equal distances from the begin and end of the line. This is useful if you are trying to line a symbol up on a dashed line type, as AutoCAD displays line types using this method.

 

Symbol offset (along line) (in|mm)

Each symbol will be offset by this amount along the direction of the line. A negative number can be used to offset in the reverse direction of the line. .  This parameter is entered in inches or millimeters at target scale.

 

Symbol placement interval

Symbols will be placed at this interval. Use 1 to place a symbol at the spacing defined. Use a value of 2 to place every other symbol, etc. This is useful when using the center option to align symbols to dashed AutoCAD line types. In this case, the Symbol spacing must match the dash-space length of the line type to compute the alignment correctly, but you may not want symbols plotted as frequently as the line type is defined.

 

Vr symbol graphic pointer (1-1000)

Defines the VrOne symbol to use to place along the line.

 

Symbol/Line mode

Defines the symbol/line placement mode.  Options are:

 

Off

Do not place symbol/line

Line and Symbols

Place the line and the symbols

Symbols only

Do not place the line.  Place symbols
 
Layer mode

Determines the layer that the symbols are placed on. Options are:

 

Same layer as line

The symbols will be placed on the same layer as the line that they belong to.

Use symbol line name

The symbols will be placed on a layer name that matches the name of the symbol line.

Use layer specified below

The symbols will be placed on the layer name entered in the text box below this prompt.

Same layer as line with prefix specified below

The symbols will be placed on a new layer that combines the prefix entered in the text box below with the layer that the line is on.

Same layer as line with postfix specified below

The symbols will be placed on a new layer that combines the postfix entered in the text box below with the layer that the line is on.
 
Layer

This layer name is used according to the Layer mode setting.

 

Cross Reference Line Fonts

This dialog defines the settings for the cross-referencing of VrOne line fonts to DXF.  Each VrOne line font may be translated to DXF in one of four different ways.  It may be translated to a DXF line style, exploded, use a symbol line, or be translated using DXF bulges.

 

 

VrOne Line Fonts

This list box displays the VrOne line font names for the current VrOne symbol file.  Clicking an entry will copy the settings to the edit fields where they may be changed.

 

Cross reference mode

Defines the cross-reference mode for the currently selected VrOne line font.  Options that are not valid for a cross-reference mode will be dimmed.  Options are:

 

Use DXF line style

Use a line style defined in “Edit DXF line types”.  Advantages: Uses standard AutoCAD line type and is editable by the client.  Disadvantages: Cannot define lines such as fence lines.

Explode line font

Breaks the fonted line into individual line segments.  Advantages: Graphically, lines appear in AutoCAD the same as they appear in VrOne.  Disadvantages: Since the lines are broken into segments, the file size is much larger.  Due to the line segments it is very difficult for the client to edit the line as a single entity.

Use symbol line

Places a line with symbols.  The symbols are placed at user-defined intervals.  Advantages: Lines are readable as mapping features.  Disadvantages: It takes many entities to create a line, which makes editing difficult.

Use bulge

Places a line with DXF bulges.  Advantages: Makes nice tree lines.  Disadvantages:  Has no other use than tree lines.  Requires large amount of storage.

 

DXF line type name

It the “Cross reference mode” is set to “Use DXF line style” then a line style may be selected here.  Line styles may be created using “Edit DXF line types”.

 

Symbol line name

It the “Cross reference mode” is set to “Use symbol line” then a symbol line may be selected here.  Line styles may be created using “Edit symbol lines”.

 

Bulge parameter

It the “Cross reference mode” is set to “Use bulge” then the bulge parameter, which defines the degree of arc, is defined here.

 

Bulge radius (in|mm)

It the “Cross reference mode” is set to “Use bulge” then the bulge radius is defined here.  This parameter is entered in inches or millimeters.

Cross Reference Symbols

This dialog defines the settings for the cross-referencing of VrOne symbols to DXF.  Each symbol definition in VrOne may be translated to DXF in one of four different ways.  It may be translated as a Block, exploded, placed as text, or translated as a DXF point.  Symbol names may also be cross-referenced to a client’s block library and a scale factor may be applied to adjust the size. 

 

 

VrOne Symbols

This list box displays the VrOne symbol names for the current VrOne symbol file.  Clicking an entry will copy the settings to the edit fields where they may be changed.

 

Cross reference mode

Defines the cross-reference mode for the currently selected VrOne symbol.  Options that are not valid for a cross-reference mode will be dimmed.  Options are:

 

DXF Block

Places the symbol as a DXF block.  This is the preferred method for translating symbols

Explode VrOne Symbol

Breaks the symbol into individual line segments.  Disadvantages: Since the symbol is broken into segments, the file size is much larger.  Due to the line segments it is very difficult for the client to edit the symbol as a single entity.

Place text

Places the symbol as a text label.  This is normally only used when the target systems does not understand blocks.

DXF point

Places the symbol as a DXF point.  (See DXF point display mode)

 

DXF block name

It is possible to rename the VrOne symbol when translating to a DXF block.  This is normally used when using a client’s block library.

 

Block scale factor

This scale factor is applied to the block size when translating a VrOne symbol to a DXF block.  It is normally used when using a client’s block library and scaling is needed to place the block at the same size.

 

Symbol text

If the “Cross reference mode” is set to “Place text” the text defined here will be placed instead of a symbol.  The size of the text will be the radius of the symbol.

Cross Reference Text Fonts

VrOne supports 12 text fonts and these font styles are cross-referenced to match the text font styles in AutoCAD.  By default this cross-reference is set to the best match between VrOne and AutoCAD text font styles and should not need to be modified.

 

 

Add Vr Layers to Layer Table

Scans open VrOne file(s) and copies the layers used to the DXF layer table.  “Edit Layer Table” may be used to cross reference VrOne layer numbers to AutoCAD layer names.  If layer names have been defined in VrOne then those layer names will be used in the table.  If a layer name has not been defined in VrOne then the layer number will be used with the word “Layer” before the number.

 

 

Reset Symbol Scale Factors

Resets all scale factors to –1.0 in the Symbol Cross Reference table. This is useful if the Global Scale Factor is used to set a uniform scale for all symbols. The following prompt is displayed after pressing this button.

 

Load CADMAP Parameter File

Loads a CADMAP parameter file (.ACO) and translates it into the current translation parameters.

Translate

Translates the current VrOne file(s) using the current translation parameters into a DXF file.

Help

Starts the browser and displays the current help document.

Quit

Quits Dxf Out and gives an option to save the current parameters.

 

 

Quick Translation

The following may be done to translate VrOne file(s) to a DXF file in the fewest possible steps.  The result will be a translation in which all lines will be translated as solid.  Symbols will be translated as blocks and text labels will be translated with the proper text font styles.

 

  1. Init Parameters
  2. Define the “Dxf file name” in “Edit Parameters”
  3. Add Vr Layers to Layer Table
  4. Translate

 

Translation Hints