VrOne/Python Programming
|
ON-LINE REFERENCE DOCUMENTATION CARDINAL SYSTEMS, LLC 386-439-2525 |
The VrOne/Python Graphics class manages VrOne window graphics operations. More…
Window management
Drawing management
Cursor management
VrOne can open up to 8 graphics windows at one time. Each window can display vector graphics from the currently open workspaces at different locations, scales, and rotations. The Graphics class allows the user to draw graphics directly to any window or all windows at once. Several drawing modes are supported, as well as calls for rubber-banding lines. This class also allows the window parameters such as Origin and Scale to be changed and queried, and the current cursor state to be queried.
NOTE: The windows numbers range from 0 to 7.
The following example centers the currently active window at coordinate 15.0, 15.0, 0.0, and then draws a large X at the center of the screen.
Gr = PyVrGr
()
Gr.SetWinOrg
(15.0, 15.0, 0.0)
Gr.PenNum
(1)
Gr.DrawMode
(MODE_DRAW)
Gr.Plot (10.0, 10.0, 0.0,
PEN_UP)
Gr.Plot (20.0, 20.0, 0.0,
PEN_DOWN)
Gr.Plot (10.0, 20.0, 0.0,
PEN_UP)
Gr.Plot (20.0, 10.0, 0.0,
PEN_DOWN)
Replots the graphics windows.
|
WinNum |
Window number (-1=All,Default=-1) |
Returns the origin of the active graphics window.
|
Corner |
Corner to get (0=Lower Left, 1=Lower Right, 2=Upper Right, 3=Upper Left) |
|
WinNum |
Window number (0=First window) |
|
Returns |
CorX, CorY, CorZ = Corner of graphics window (ground) |
Returns the size of the active graphics window.
|
Returns |
Width. Height = Width and height of active window (ground) |
Sets the origin of the active graphics window.
|
OrgX, OrgY, OrgZ |
Origin of graphics window (ground) |
|
Returns |
void |
|
Example |
Gr.SetWinOrg (15.0, 15.0, 0.0) |
Returns the origin of the active graphics window.
|
Returns |
OrgX, OrgY, OrgZ = Origin of graphics window (ground) |
|
Example |
(OrgX, OrgY, OrgZ) = Gr.GetWinOrg () |
Sets the rotation of the active graphics window.
|
RotX, RotY, RotZ |
Rotation of graphics window (radians) |
|
Returns |
void |
|
Example |
Gr.SetWinRot (0.0, 0.0, PI/4.0) # Set z rotation to 45 degrees |
Returns the rotation of the active graphics window..
|
Returns |
RotX, RotY, RotZ |
|
|
RotX, RotY, RotZ |
Return rotation of graphics window (radians) |
|
Example |
(RotX, RotY, RotZ) = Ws.GetWinRot () |
Sets the scale of the active graphics window.
|
Scale |
Scale (1"=). |
|
Returns |
void |
|
Example |
Gr.SetWinScale (50.0) |
Returns the scale of the active graphics window
|
Returns |
Scale = Return window scale (1"=) |
|
Example |
(Scale) = Gr.GetWinScale () |
Sets the active window class to communicate parameters to.
|
ActiveWin |
Active window to set. |
|
Returns |
void |
|
Example |
Gr.SetActiveWin (0) |
Returnss the active window class to communicate parameters to.
|
Returns |
ActiveWin - Number of active window |
|
Example |
ActiveWin = Gr.GetActiveWin () |
Returns the RGB color values of the specified pen.
PenNum -> WinNum ->
|
PenNum |
Pen Number |
|
|
WinNum |
Window number |
|
|
Returns |
Red, Green, Blue |
|
|
Red |
Red color component (0-255) |
|
Green |
Green color component (0-255) |
|
Blue |
Blue color component (0-255) |
|
Example |
(red, green, blue) = Gr. GetColor (1, 0) |
Sets the current pen number.
|
PenNum |
Pen Number |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.PenNum (2) |
Makes current line font represent a dashed line
NOTE: This only works with the Plot1 command.
|
LineLen |
Length of line (ground or inches) |
|
SpaceLen |
Length of space (ground or inches) |
|
UseInches |
1=Lengths are in inches, 0=Lengths are in ground units |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.SetDashed (0.2, 0.1, 1) |
Sets the current line if the hardware device is capable.
|
Width |
Line width in pixels (integer) |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.LineWidth (2) |
Sets the current line if the hardware device is capable.
|
Width |
Line width in ground units (floating point number) |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.LineWidth (2) |
Sets the current draw mode.
|
DrawMode |
1 = Draw - MODE_DRAW 2 = Erase - MODE_ERASE 3 = Exclusive - MODE_XOR 4 = Or - MODE_OR |
|
WinNum |
Window number (-1=All, Default=-1) |
|
void |
|
Example |
Gr.DrawMode (MODE_DRAW) |
Plots a line.
|
x, y, z |
Coordinate to plot |
|
Pen |
Pen command. 1=up PEN_UP 2=down PEN_DOWN 4=end PEN_END (optional) (default=0) |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
# Draw a line segment Gr.Plot (10.0, 25.54, 5.6, 1) Gr.Plot (60.76, 312.32, 7.8, 2) |
Plots a line with fonting (works with SetDashed method)
|
x, y, z |
Coordinate to plot |
|
Pen |
Pen command. 1=up PEN_UP 2=down PEN_DOWN 4=end PEN_END (optional) (default=0) |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
# Draw a line segment Gr.Plot (10.0, 25.54, 5.6, 1) Gr.Plot (60.76, 312.32, 7.8, 2) |
Flushes graphics buffer.
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.Flush () |
Sets flush mode.
|
FlushMode |
0 - Ignore all flushes until FlushMode is set to 1. This is normally used for a screen replot. 1 - Process all flushes. |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.SetFlushMode (1) |
Draws a marker with the current draw mode and color
|
Ground position to plot marker |
|
|
Type |
Type of marker (MARK_CROSS|MARK_SQUARE | MARK_X | MARK_CIR|MARK_ TRI|MARK_CIRX||MARK_CIRCROSS (default=MARK_CROSS) |
|
Radius |
Radius in ground units (-1 =Plot scaled to view, default=-1) |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.DrawMarker (100.23, 106.34, MARK_X, 1.0) |
Plots tentative marker.
|
x, y, z |
Ground position to plot marker |
|
Type |
Type of marker (MARK_CROSS|MARK_SQUARE | MARK_X | MARK_CIR) (default=MARK_CROSS) |
|
ScaleFac |
Scale Factor 1.0 = 1/10 inch (default=1.0) |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.PlotMarker (100.23, 106.34, MARK_CROSS, 2.0) |
Erases tentative marker at it's last location.
NOTE: PlotMarker MUST have been called first
|
void |
|
Example |
Gr.EraseMarker () |
Draws rubber-banded line segment.
|
Current point |
|
|
Pen |
Pen command 1=Start point, 2=End point |
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.SetRband (10.0, 10.0, 0.0, 1) while (reading_input): # Insert code to read from input device into curx, cury, curz Gr.SetRband (curx, cury, curz, 2) |
Draws rubber-banded line segment at it's last position.
|
WinNum |
Window number (-1=All, Default=-1) |
|
void |
|
Example |
Gr.SetRbandLast () |
Hides the current rubber-banded line segment if visible.
|
Window number (-1=All, Default=-1) |
|
|
Returns |
void |
|
Example |
Gr.HideRband () |
Erases rubber-banded line segment at it's last position.
|
WinNum |
Window number (-1=All, Default=-1) |
|
Returns |
void |
|
Example |
Gr.EraseRband () |
Returns the rubber band state of the active window
|
0=Rubber band is not visible 1=Rubber band is visible |
|
Example |
State = Gr.GetRbandState () |
Returns the current cursor state
|
Returns |
x, y, z, key |
|
|
x, y, z |
Current cursor position (ground) |
|
key |
Current key being pressed (-1 = None) |
|
Example |
(x, y, z, key) = Gr.GetCursor () |