| 08/13/08 |
2416 |
Fix |
Vr Config |
|
Removed "Unknown" digitizer option from XY digitizer list. If this digitizer was selected it could prevent Vr programs from opening. |
| 08/12/08 |
2403 |
Mod |
VrOne |
Shape Out |
Added option to ouput a separate shape file for each layer. |
| 08/12/08 |
2414 |
Fix |
VrOne |
Ascii In |
Fixed problem with input filenames getting truncated. |
| 08/11/08 |
|
Mod |
VrOne |
Dxf In |
Error file in now placed in the same folder as the parameter file unless a full patch is specified in the error file name. |
| 08/11/08 |
2411 |
Fix |
VrOne |
Dxf In |
Fixed to read layer table regardless of location in the header of the DXF file. This was leading to "Cannot cross reference linetype..." messages in the dxf.err file. |
| 08/11/08 |
2410 |
Fix |
VrOne |
Cut Sheet |
Fixed problem with line and sheet layer fields not getting populated when using the "Load Params" button. |
| 08/10/08 |
|
Fix |
VrTwo |
|
Fixed problem with buffers not always updating is roaming mode. |
| 08/07/08 |
2401 |
Mod |
VrOne/VrTwo |
|
Removed limit on width of main window. |
| 08/07/08 |
2403 |
Fix |
VrOne |
Shape Out |
Fixed problem with Text Points option not writing out any entries. |
| 08/03/08 |
2387 |
Mod |
VrOne/VrTwo |
Control Drive |
Fixed number rollover (Cd). Added the ability to backup (Cd -). Added search by point name (Cd "PointName"). Fixed prompt option (Cd P). Added ability to drive to model load point (Cd L). Added re-drive to current point (Cd R). Added help dialog box (Cd H). |
| 07/29/08 |
|
Fix |
VrTwo Orientation |
Import Exterior |
Uses correct tile size when creating epipolar images. |
| 07/26/08 |
2370 |
Fix |
VrTwo |
Zoom All |
Fixed zoom all command to work in Static and Roaming modes. |
| 07/24/08 |
|
Mod |
VrMosaic |
|
Added option to generate Auto seam-lines. These seam lines follow the center of the overlap area between strips and images. |
| 07/21/08 |
2351 |
Fix |
VrOne/VrTwo |
All key-ins |
Fixed possible overflow problem that could be caused when a key-in was greater than 64 characters. |
| 07/14/08 |
|
Fix |
VrTwo |
|
Fixed problems with new tiled roaming method that could cause window to become unresponsive. |
| 07/13/08 |
2340 |
Fix |
VrOne |
Dxf Out |
Fixed problems when using very long paths for the parameter file. |
| 07/11/08 |
|
Fix |
VrOne |
Image Levels |
Improved support for 16-bit images. Added histogram display, and "Auto" levels option. |
| 07/10/08 |
|
New |
VrOne |
Histogram |
Added new command that displays a histogram of the currently active image. Can option pass in the image level to be used for histogram computation (from 1 to 7). |
| 07/10/08 |
|
Mod |
Vr Configuration |
Image Graphics |
Added options for auto stretching 16-bit images for better display. These options include: - Auto stretch 16-bit images?
- Auto stretch histogram level - Pyramid level to use when computing histogram
- Auto stretch save?
|
| 06/12/08 |
1890 |
Fix |
Image Utility |
Misc |
Fixed output directory paths to handle more characters. |
| 06/12/08 |
|
Mod |
VrOne |
3D,3DS |
All settings are now retained between runs. |
| 06/12/08 |
1564 |
Fix |
VrOne |
3D,3DS |
Was not taking text entities into account when computing display extents. |
| 06/12/08 |
1564 |
Fix |
VrOne |
3D,3DS |
Fixed display of axis icon with white background. |
| 06/12/08 |
1806 |
Mod |
VrOne |
Inverse |
Added option for point comments. |
| 06/11/08 |
2209 |
Fix |
VrOne |
Shape Out |
Fixed problem with parameters not loading correctly. |
| 06/11/08 |
2200 |
Mod |
VrOne |
Shape Out |
Added option to use Link entity attribute. |
| 06/11/08 |
2256 |
Fix |
VrOne |
Clear Polygons |
Fixed problem where long parameter file names could cause a crash. |
| 06/11/08 |
|
Mod |
VrTwo |
Stealth Z-Mouse |
Modified driver to support the assignment of the Clutch/Shift button to any physical button on the mouse. |
| 06/10/08 |
895 |
Fix |
VrOne |
Batch Area |
Works with lines collected in either direction. |
| 06/09/08 |
1466 |
Fix |
VrOne |
Batch Smooth |
Fixed problem with points wrapping around start point. |
| 05/29/08 |
2159 |
Fix |
Vr2Ori |
Import Interiors Batch |
Fixed problem that could cause the photo names not to parse correctrly into strip and photo numbers and would cause the import to fail. |
| 05/19/08 |
|
Mod |
Vr2Ori |
Import Camera |
The import of ISAT camera files now initializes undefined fiducial coordinates to zero. This was added to handle cases when only four of the eight fiducials are defined in the ISAT camera file. |
| 05/15/08 |
2178 |
Mod |
VrOne |
Dxf Out |
Added support for 3D Faces |
| 05/08/08 |
2135 |
Fix |
VrOne |
Edit Function Keys |
Import commands will now import partial lines. |
| 05/07/08 |
|
Fix |
Misc |
Image Vewing |
Added support for viewing TIFF scanline images in planar separate format. |
| 05/05/08 |
2153 |
Fix |
VrOne |
Shape In |
List of import file names are now reset correctly when loading a new parameter file. |
| 04/22/08 |
2124 |
Fix |
Python |
PyVrPromBox |
Added Delete method. This is needed to allow roaming to resume in VrTwo. |
| 04/06/08 |
2082 |
Fix |
VrOne |
Layer Control |
Fixed problem with text and symbol pen colors getting swapped. |
| 04/04/08 |
2075 |
Mod |
VrOne/VrTwo |
Delete, Move, Copy Layer (DelLay, MovLay, CopLay) |
When running these batch applications from a key-in the Workspace mode now defaults to All as described in the user documentation. |
| 04/02/08 |
|
Mod |
VrTwo Orientation |
Epipolar Resampling |
Added options to set tile size and compression rate on epipolar images. |
| 04/01/08 |
2011 |
Fix |
VrOne |
Delete Outside Polygons |
Fixed problem where 0 length lines could be written to file. |
| 04/01/08 |
2011 |
Fix |
VrOne |
Clear Polygon |
Fixed problem where 0 length lines could be written to file. |
| 04/01/08 |
2011 |
Fix |
VrOne |
Cut Polygon |
Fixed problem where 0 length lines could be written to file. |
| 04/01/08 |
2011 |
Fix |
VrOne |
Batch Trim |
Fixed problem where 0 length lines could be written to file. |
| 04/01/08 |
|
Mod |
VrOne |
MstOut,MstIn |
Updated translators to handle mirrored cells. |
| 03/26/08 |
2015 |
Mod |
VrAirTrig |
Layout Point Remeasure |
Increased the maximum number of strips and photos when remeasuring a point. The number of strips was increased from two to three and the number of photos per strip was increased from from three to four. A single point may now be in up to 12 photos. |
| 03/21/08 |
1939 |
Fix |
Vr2Ori |
Import Exterior Batch |
Fixed problem that could cause an orientation to compute incorrectly if a photograph had an unmeasured fiducial and the previous photograh had the same fiducial measured. |
| 03/20/08 |
2025 |
Mod |
VrOne/VrTwo |
Edit symbol |
Added mirror option to Edit Symbol. This allows the symbol to be mirrored along the X or Y axis. |
| 03/13/08 |
|
New |
VrOrtho |
Import Interior Orienations |
Added this option to the Orientation pull-down menu. Allows you to import interior orientations from multiple file types, or to set corner interior orientations on multiple images. |
| 03/13/08 |
|
New |
VrOrtho |
Import Exterior Orienations |
Added this option to the Orientation pull-down menu. This combines all exterior import options into one dialog. Added some import options that were not previously available. |
| 03/12/08 |
|
New |
VrTwo |
Roaming |
Change roaming memory management method to use preset tiles instead of memory percentage. You can now specify the maximum number of tile buffers in the X and Y direction when roaming. This is set under the Image Graphics dialog in Vr Configuration. |
| 03/07/08 |
|
Fix |
VrOne |
Shift Workspace |
Fixed problem that could cause a crash or restoring of deleted entities. |
| 03/06/08 |
|
New |
VrOne |
Sheet Layout |
New application that allows a regular grid of sheet tiles and sheet labels to be placed automatically. |
| 03/05/08 |
|
Mod |
VrOne |
ShpOut |
Added Text Points option. Increased search layers to 1000 chars. |
| 02/22/08 |
1940 |
New |
VrTwo |
VrTwo |
Added the support for joysticks, joypads, game controllers, gamepads as input devices for VrTwo. These devices may be the primary XYZ, Button input for VrTwo or may supplement existing input devices such as the Steath mouse or handwheels. Please see Joysticks for more information. |
| 02/20/08 |
|
New |
VrTwo |
VrTwo |
Added the support for ADS stereo images. A new command Open ADS is can be used to define ADS stereo models and open them in stereo. |
| 02/14/08 |
|
New |
VrTwo |
|
When using the system mouse or the original Stealth USB mouse the Ctrl key on the system keyboard may now be held down for a 32x multiplication of the Z motion. This is now in addition to the Shift key which adds a 4x multipication of the Z motion. |
| 02/11/08 |
|
New |
VrOne VrTwo |
Point to Plane (PoiPla) |
Added this interactive application. Allows the user to define a three-dimensional, flat plane by observing three points then measure distances to that plane by observing an additional point. The result of the computation is a single distance from a point observed to the current base and is displayed in the Main Window. |
| 01/30/08 |
1917 |
Mod |
VrOne |
Delete Close Points |
Increased limit on layer number lines. |
| 01/30/08 |
1861 |
Mod |
Vr2Ori |
Import Measurements Batch |
Added ability to read ORIMA measurement files with points out of order. |
| 01/30/08 |
|
Mod |
Vr2Ori |
Import Interior Batch |
Added the ability to rotate the measurements of the photos on user define strips. This may be used when the photos of a strip or strips are rotated 180 degrees. |
| 01/30/08 |
|
New |
Vr2Ori |
Clear Models |
Added this function which clears the orienations of models specified by the user. This should when the re-import of models is required. |
| 01/30/08 |
|
Mod |
VrOne,VrTwo |
Insert Line |
Added the ability to create a circle from three digitized points. This mode is turned on from the Enter (b7), Params (b7), Behavior of end button option. With this mode on the first three points on a line are digitized using button 1. After the third point is read a 3 dimensional circle is inserted. The circle mode may be turned on from the EndMod=3 key-in. This key-in may be placed in the Local Arguments field of a Fuction Key. |
| 01/26/08 |
|
Fix |
VrAt |
AtAdjust |
Modified to allow the installation of AeroSys on a drive other that the C: drive. |
| 12/18/07 |
1806 |
Mod |
VrOne/VrTwo |
Inverse |
Added option to Append to file if Write to file is on. |
| 12/07/07 |
|
Mod |
Various |
|
Added support for 12-bit TIFF images. |
| 12/05/07 |
|
Mod |
Image Utility |
|
Added more options in Exterior Orientation conversion routine. |
| 12/04/07 |
|
Mod |
VrOrtho |
|
Added option to output coolor infrared images when using 4 channel images with infrared as 4th channel. |
| 12/04/07 |
|
Mod |
VrOrtho |
|
Added support for handling 4 channel images. |
| 11/29/07 |
|
New |
VrOne,VrTwo |
Pack Vr (PacVr) |
Added option under general configuration settings to pack files to local Vr install directory. This can dramatically speed up packing times if vector files are opened from network drives. This option is turned off by default. |
| 11/29/07 |
|
Mod |
VrOne,VrTwo |
Ascii In (AscIn) |
Added ability to handle spaces at begin or end of numbers in comma-delimited files. |
| 11/27/07 |
|
New |
VrOne,VrTwo |
Zip Configuration Files (ZipCfg) |
Added new command that takes current configuration files and places them in a file names configfiles.zip in the Vr install directory. This is useful for gathering up important configuration files to move to a new machine or to send to the Cardinal support team. |
| 11/27/07 |
|
New |
VrOne,VrTwo |
|
Added option to start VrOne/VrTwo with the DEBUGLOG command line argument. This will log all commands to a file named vrdebuglog.txt in the Vr hostdir directory. |
| 11/18/07 |
1704 |
Mod |
VrOne,VrTwo |
Break Line (BreLin) |
Added the ability to re-save the middle portion of the broken line in a user specified layer. Please see Break Line for more information. |
| 11/17/07 |
873, 1680 |
Mod |
VrOne,VrTwo |
Insert Line (InsLin) |
Modified the handling of the elevations when splicing a line. Options now include Blend, Inherit, Slope. Please see Insert Line for more information. |
| 11/16/07 |
|
Mod |
VrOne,VrTwo |
Edit Line (EdiLin) |
Added Slope Line in which the elevations on a line are interpolated based on the elevations from the first and line points on the line. Slope Line can be found in the Line Functions menu. |
| 11/12/07 |
|
Fix |
VrOne |
|
Fixed problem where invalid keyins such as "layoff =" could cause a crash. |
| 11/08/07 |
1687 |
Fix |
VrOne |
Edit Image |
Retains world file rotation parameters when moving images. |
| 11/07/07 |
1677 |
Fix |
VrOne |
|
Fixed problem with small dot displaying at end of text entities. |
| 11/06/07 |
1491 |
Fix |
VrOne |
Volumes |
Fixed problem with volumes reporting 0.0, and with processing complex data sets. |
| 11/06/07 |
|
New |
VrOne,VrTwo |
3DWIN, 3DSWIN |
New commands that work like 3D and 3DS, but allow a window of entities to be selected first. This can be useful when looking as sub set of larger data sets, such as lidar points or large TINs. |
| 11/06/07 |
509, 811, 1647 |
Mod |
VrAirTrig |
AeroSys Adjust |
Add multiple camera support when adjusting with AeroSys. VrAirTrig supports up to 10 cameras per project. In previous versions the output to AeroSys was supporting only one camera. |
| 11/05/07 |
1666, 1667 |
Fix |
VrOne |
DTM |
Fixed problems when using edge and inner triangle maximum lengths. Inner triangles with edges smaller than maximum are no longer deleted permanently from surface, but are not displayed when outputting triangles, and contours are not drawn through them. |
| 11/04/07 |
1674 |
Fix |
VrOne |
Shape In |
Fixed problems with the way feature table items were recorded to parameter file. |
| 10/12/07 |
1556 |
Fix |
VrOne |
Edit Function Keys |
Fixed problem where entering 48 characters in feature codes would cause VrOne to crash. |
| 10/12/07 |
1559 |
Fix |
VrOne |
Shape Out |
Fixed problem where editing parameters would cause theme settings to be replaced with invalid values. |
| 10/12/07 |
|
Fix |
VrOne |
Batch Node |
Was computing short distance based on slope instead of horizontal distance. |
| 10/11/07 |
1553 |
Fix |
VrOne |
Batch Node |
When using mode that write all un-noded points to file, will not delete existing segment shorter than the short distance. |
| 10/10/07 |
1556 |
Fix |
VrOne |
Edit Function Keys |
Fixed problem where function key .csv files could not be imported (would report 0 keys). |
| 10/09/07 |
|
Mod |
VrOne |
Inverse |
Added ability to set number of decimal places to display for linear an angular results. |
| 10/09/07 |
|
Mod |
VrOne |
Dxf Out |
Added new option "Write unused blocks" in the general parameters. |
| 10/09/07 |
1457 |
Mod |
VrOne |
Dxf Out |
Added two new layer modes to the symbol lines options. "Same layer as line with prefix specified below", and "Same layer as line with postfix specified below". |
| 10/8/07 |
|
New |
Various |
Image Display |
Added support for displaying 8-bit grayscale TIFF images. |
| 10/08/07 |
1538 |
Fix |
Python |
PyVrSym,PyVrLine |
When switching between Id method of PyVrSym and PyVrLine, the line id would sometimes be displayed when the symbol id method was called. |
| 10/08/07 |
|
Mod |
Python |
PyVrWs |
Added SetViewFlags, GetViewFlags, SetViewFlag, GetViewFlag to control workspace display. |
| 09/21/07 |
|
Mod |
VrTwo |
|
Ctrl->PgUp to zoom all the way out in roaming is now supported from a sub-pixel zoom level. |
| 09/21/07 |
|
Mod |
All |
|
Improved graphics window placement to avoid conflicts between programs. This may reset window positions to default locations. |
| 09/20/07 |
|
Mod |
VrOne |
|
Added option to turn off center justified labels on menu keys. Option is in Vr Configuration under General settings - "Center labels in menu keys". |
| 09/20/07 |
|
Fix |
VrOne,VrTwo |
|
Fixed problem where Edit Elevation would not snap to any lines. |
| 09/20/07 |
|
Mod |
Vr2Ori |
|
Added option to use roaming mode in Absolute orientation. |
| 09/19/07 |
|
Mod |
Vr2Ori |
|
Added support for the import of MATCH-AT interior orientations and the model import from MATCH-AT from measurements and from exterior orientations. The MATCH-AT project file (.prj) is used to accomplish the import. |
| 09/17/07 |
|
Fix |
VrOrtho |
|
Fixed intermittent problem when reading exterior orientation from Albany .OPM files. |
| 09/14/07 |
|
Mod |
VrTwo |
|
Fixed problem with cursor moving outside model when switching between models in roaming mode. |
| 09/14/07 |
|
Mod |
VrTwo |
|
2D windows in roaming mode now start with window number two instead of three. |
| 09/10/07 |
|
Mod |
VrMosaic |
|
VrMosaic no longer loads its configuration from vrmosaic.cfg. It now shares the vr.cfg file used by all other Vr applications. |
| 09/10/07 |
|
New |
VrMosaic |
Layer Control |
Added this command which was already available in VrOne. |
| 09/07/07 |
|
Fix |
VrOne |
Correlate Area |
Was using MaxSeedDist even if seed data was not specified. |
| 09/05/07 |
1412 |
Fix |
VrOne |
MstIn |
Support use of -1 for VrLayer in Level Xref table for text and symbols in addition to lines when incoming level uses the format "Level #". |
| 09/05/07 |
|
Mod |
VrOne |
Image Clean |
Display dialog if there is not enough memory to output new images. |
| 09/05/07 |
|
Fix |
VrOne |
Ascii Out |
Does not require output filename when running in one file per workspace mode. |
| 08/30/07 |
|
Mod |
VrOne |
Layer Management |
Added ability to control layer display and snap status separately for each graphics window. LAY... and SNALAY... commands now take an optional window argument. The window argument must be preceded with a w character (i.e. "LAYOFF w1 100"). Added window selection to LAYCON dialog. |
| 08/29/07 |
1432 |
Mod |
VrOne |
MstIn |
Added scale operator to apply to symbols in the symbol xref table. |
| 08/28/07 |
1431 |
Mod |
VrOrtho |
|
If VrOrtho runs out of memory while creating an ortho, it would result in a partial image file. Now, an error message will be generated, and the partial image will be erased. |
| 08/27/07 |
|
Mod |
VrOne |
Macros |
Added option "Start macros with Overlay mode off" in Vr Configuration General settings. The safest way to run macros is with overlay mode off. |
| 08/27/07 |
1425 |
Fix |
VrOne |
Layer Control |
Fixed problem where toggling layer off/on with multiple files open could cause a crash. |
| 08/27/07 |
1424 |
Fix |
VrOne |
Correlate Area |
Fixed problem where program would not run correctly if Delete Previous Points was on. |
| 08/24/07 |
|
Mod |
VrOne |
|
Check version dialog now has options to turn off version check and version dialog at startup. |
| 08/24/07 |
|
Mod |
VrTwo Orientation |
|
Fixed parameter update problem when using the epipolar resampling from the Orientation menu. Added better relative orientation point approximations when working with close range imagery. |
| 08/23/07 |
1416 |
Fix |
VrMosaic |
|
Fixed possible crash if "Number of digits for photo number" was set larger than the image names in the project. |
| 08/23/07 |
1412 |
Fix |
VrOne |
MstIn |
Support use of -1 for VrLayer in Level Xref table for incoming levels using the format "Level #". |
| 08/22/07 |
|
Fix |
VrOne |
|
Trying to build pyramids with 8-bit JPEG2000 files could cause a crash. |
| 08/22/07 |
|
Fix |
VrOne |
Show Drive |
FIT option with one point in drive file would zoom to unknown location. |
| 08/21/07 |
1411 |
Mod |
VrOne |
Line Cross |
Made large increases in performance. Removed minimum distance parameter, and added option to include/exclude node points when reporting crossings. |
| 08/20/07 |
|
Mod |
VrOrtho |
|
Fixed problem with importing exterior orientations. |
| 08/16/07 |
1409 |
Mod |
VrOne |
DxfOut |
Fixed problem with random elevations on lines in layers that have been flagged as 2D in the layer xref table. |
| 08/15/07 |
|
Mod |
VrTwo Orientation |
|
Edit project dialog checks to make sure left and right images are not the same for the current model. |
| 08/14/07 |
|
Fix |
VrTwo Orientation |
|
Fixed image rotate when going from TIFF-JPEG compressed to TIFF non-compressed. |
| 08/14/07 |
1403 |
Fix |
VrOne |
Global Change |
Fixed graphics pointer browse button to display correct dialogs. |
| 08/13/07 |
1382 |
Mod |
VrOne |
Global Change |
Fixed problem with roaming not starting again after using symbol browser in the GLOB dialog. |
| 08/13/07 |
1379 |
Fix |
VrOne |
Edit Function Keys |
Fixed saving of label colors. |
| 08/10/07 |
1381 |
Mod |
VrOne |
Tick Line |
Added Tick Line to the Edit menu |
| 08/12/07 |
|
New |
VrApplyCam |
|
New application to apply camera calibration data to raw images to correct for lens distortion. |
| 08/09/07 |
|
Mod |
VrTwo Orientation |
|
Added ratio display to stereo win. |
| 08/09/07 |
|
Mod |
VrTwo Orientation |
|
Improved stereo display of .jp2 images. |
| 08/09/07 |
|
Mod |
VrTwo Orientation |
|
Search window size now depends on zoom level. Added Correlation Search and Target factors. |
| 08/07/07 |
1356 |
New |
VrRotate |
|
New application to allow rotating images from a command-line. |
| 08/06/07 |
1282 |
Fix |
Vr2Ori |
Absolute Orientation |
On initial entry into Absolute Orientation when no points have been measured the center of the model is placed at the center of the window. |
| 08/03/07 |
1350 |
Fix |
VrOne |
Batch Node |
Fixed problems with meaning elevations. |
| 08/01/07 |
|
Fix |
VrOne |
Bump Elevations |
Fixed link to help file. |
| 08/01/07 |
1280 |
Fix |
VrOne |
Insert Text |
Fixed display problem caused when the right decimal accuracy was set to zero (DecAcc=0 or DecRig=0). |
| 07/31/07 |
|
Fix |
VrOne |
Create Symbol |
Fixed instability problems with Create Symbol. |
| 07/26/07 |
|
Fix |
VrOne |
Edit Function Keys |
Fixed graphic pointer browse buttons. |
| 07/23/07 |
|
New |
Python |
PyVrImgMgr |
Added new class for managing image in VrOne. Abilities include opening and closing image, querying image properties, changing image properties, and reading image pixel data. |
| 07/20/07 |
1305 |
Mod |
VrOne |
Dxf Out |
Layer cross-reference dialog updated to display all columns. |
| 07/20/07 |
|
Mod |
VrOne |
Ascii In |
Will run without any files open. |
| 07/20/07 |
|
Mod |
VrOne |
Dxf In |
Will run without any files open. |
| 07/20/07 |
0983 |
Mod |
VrOne |
Dxf In |
Added support for importing 3D faces. |
| 07/18/07 |
|
Fix |
VrOne |
Insert Fly Line |
Attach would not work at beginning of line if "End After Attach" was on. |
| 07/18/07 |
1295 |
Fix |
VrAt,VrTwo Orientation |
Stereo Window |
Cursor in stereo window would only display on one side until color was changed. |
| 07/18/07 |
1293 |
Fix |
VrOne |
Multiple |
Fixed problem where new entities would display colors from alternate pen table until a replot was performed. |
| 07/17/07 |
1287 |
Mod |
VrOne |
Microstation In |
Supports level number in addition to level names when reading .mst file from Microstation V8. Must be using version 1.39 or later of the MSTOUT8 MDL. |
| 07/17/07 |
1290 |
Fix |
VrOne |
Digitize Control |
Runs without any vector files open. |
| 07/16/07 |
1275 |
Mod |
Image Utility,VrTwo Orientation |
Inner Orientation |
Added warning if computed pixel is different than entered pixel size. |
| 07/16/07 |
0845 |
Fix |
Image Utility,VrTwo Orientation |
Inner Orientation |
Crashing on F3 or F4 zoom if zoom scale factor was 0.0. |
| 07/13/07 |
1279 |
Fix |
VrOne |
DTM |
DTM crashing on invalid line Z point. |
| 07/13/07 |
|
Mod |
VrTwo |
ZOOA |
Works during in stereo roaming. |
| 07/13/07 |
1160 |
Fix |
Microstation V8 |
MSTIN MDL |
Levels were not always being assigned correctly. |
| 07/13/07 |
1124 |
Mod |
VrOne |
Global Change, Edit Function Keys |
Added graphic pointer browse buttons to these routines. |
| 07/13/07 |
1264 |
Fix |
VrOne |
Delete Close, Delete Points in Polygons |
Was reporting read-only workspaces when a single workspace was open. |
| 07/12/07 |
|
Mod |
VrOrtho,VrMosaic |
Parameters |
Added option for PCS and Units when creating GeoTIFF tags. |
| 07/12/07 |
|
Mod |
VrOne |
Multiple |
Mosaic, ImgMerge, CutSheet keep PCS and Units GeoTIFF tags. |
| 07/12/07 |
|
Mod |
VrTwo Orientation |
Import |
Added the ability to import Exterior Orientations from the ISAT 'photo' file. This is supported when importing single models or importing modes in batch mode. |