List Of Commands

Following is a list of all global key-ins available in VrOne and VrTwo. These may be keyed-in at any time.

Name	Key-in	Arguments	Description
Pop Application	Pop		Pops (terminates) current application
Pop Application	Pop	1-20	Pops (terminates) a number of applications
Pop Application	Pop	All	Pops (terminates) all applications
Swap Application	Swa		Swaps the top two applications
Associate Command 1	Ac1		Execute associate command(s) 1
Associate Command 2	Ac2		Execute associate command(s) 2
Wait for application exit	Wait		Waits until the current application has terminated before processing any more commands. Should be used from Vr Macros only.
No Overlay	NoOverlay, NoOve		Turns off application overlay mode. Allows only one application to be added to stack and then waits for that application to end before starting a new one. Normally used in the OnEnd argument inside function keys. Should always be paired with the Overlay command.
Overlay	Overlay, Ove		Turns on application overlay mode after it has been turned off by NoOverlay

Name	Key-in	Arguments	Description
Set Cursor	SetCur		Sets cursor parameters in dialog
Set Cursor Type	SetCur Typ	Cro, Dot	Sets cursor type
Set Cursor Size	SetCur Siz	Size	Sets cursor size in pixels
Set Cursor Color	SetCur Col	Whi, Bla, Red, Gre, Blu, Yel	Sets cursor color
Set Cursor Mask Size	SetCur MasSiz	Size	Sets the cursor mask size in pixels
Set Cursor Mask Shape	SetCur MasSha	Squ, Cir	Sets the cursor mask shape for square or circle
Set Cursor Track Plane	SetCur Tra	Vie, Gro	Sets the cursor track plane for View plane or Ground plane

Name	Key-in	Arguments	Description
Set Display	SetDis		Set display parameters using dialog box
Reset Display	ResDis		Reset display parameters to default values
Lines On	LinOn		Display lines
Lines Off	LinOff		Do not display lines
Splined Lines On	SplOn		Display splined lines with spline
Splined Lines Off	SplOff		Display splined lines without spline
Line Fonts On	LfOn		Display line fonts
Line Fonts Off	LfOff		Display fonted lines as solid
Construction Lines On	ConOn		Display construction lines
Construction Lines Off	ConOff		Do not display construction lines
Line Points On	LpOn		Display line points
Line Points Off	LpOff		Do not display line points
Line Elevations On	LeOn		Display line elevations
Line Elevations Off	LeOff		Do not display line elevations
Symbols On	SymOn		Display symbols
Symbols Off	SymOff		Do not display symbols
Text On	TexOn		Display text labels
Text Off	TexOff		Do not display text labels
Interactive Lines On	IlinOn		Display interactive lines
Interactive Lines Off	IlinOff		Do not display interactive lines
Interactive Symbols On	IsymOn		Display interactive symbols
Interactive Symbols Off	IsymOff		Do not display interactive symbols
Interactive Text On	ItexOn		Display interactive text
Interactive Text Off	ItexOff		Do not display interactive text
Set Coordinate Display Decimals	CooDis	0-10	Sets the number of decimal places for Xyz display in the Main Window
Open Coordinate Display	CooDia		Opens the Coordinate Display window
Point (LiDAR) Display Parameters	PoiDis or PO		Sets Point display filters, clipping planes and Point coloring parameters.
Point Set Z	PoiSetZ		Sets Z Slice display parameters.

Name	Key-in	Arguments	Description
Open Drive File	OpeDri		Opens drive file using dialog box
Open Drive File	OpeDri	File name	Opens drive file using file name passed. File name many be: LinCor – Line Cross drive file BatJoi – Batch Join drive file BatNod – Batch Node drive file
Drive	Dri		Drives to next point in drive file
Drive and Set Complete	DriAndSet		Sets current point as complete and drives to next point in drive file
Drive Set Complete	DriSet		Set current point as complete
Drive Clear Complete	DriCle		Set current point as not complete
Drive Reset Complete All	DriResCom		Reset all complete markers to not complete
Drive Toggle Skip Completed	DriTog		Toggle skipping of completed points when driving to next or previous point
Re-drive	ReDri		Re-Drive to current point in drive file
Drive Previous	DriPri		Drive to previous point
Show Drive Points	ShoDri		Shows all drive points in the graphics window
Show Drive Points Fit	ShoDri	Fit	Shows all drive points in the graphics window and zooms graphics window to the extents of the drive points
Reset Drive File	ResDri		Resets drive file to first point
Close Drive File	CloDri		Closes drive file
Export Drive File	ExpDri		Translates a drive file to an XYZ formatted ASCII file
Import Drive File	ImpDri		Imports an XYZ formatted ASCII file to a drive file
Drive to Control Point	ConDri Cd	H	Displays Control Drive help
Drive to Control Point	ConDri Cd		Drive to the next point (no argument)
Drive to Control Point	ConDri Cd	-	Drive to previous point
Drive to Control Point	ConDri Cd	P	Prompt for point
Drive to Control Point	ConDri Cd	L	Drives to model load point
Drive to Control Point	ConDri Cd	R	Re-drive to current point
Drive to Control Point	ConDri Cd	PointNumber	Drive to point by sequence number
Drive to Control Point	ConDri Cd	“PointName”	Drive to point by name

Name	Key-in	Arguments	Description
Set Active Workspace	Aws	WsNum	Sets the active workspace (1-256)
Workspace Control	WsCon		Displays list of open workspaces and allows visibility to be controlled in each graphics window
Set Parameters	SetPar		Set current window parameters
Set Display Parameters	SetDis		Set display parameters
Point Density	PoiDen (PD)		Set point density
Edit Configuration	EdiCon		Edit Vr configuration
Edit Toolbars	EdiToo		Edit toolbars
Auto Switch Configuration	AutSwi		Display configuration dialog for Model Manager auto switching
Auto Switch	AutSwi	0 or 1	Turn Model Manager auto switching off/on
Auto Switch	AutSwi	2-40	Set Model Manager auto switch percent
Search Radius	SeaRad	Ground	Sets current entity search radius
Snap Set	SnaSet		Set snap parameters
Snap Toggle	SnaTog		Toggles snap on/off
Snap On	SnaOn or F11		Turns snap on.
Snap Off	SnaOff		Turns snap off
Snap Workspace Current	SnaWsCur		Snap to entities in current workspace only
Snap Workspace All	SnaWsAll		Snap to entities in all open workspaces
Snap All	SnaAll		Snap to all entities
Snap Lines	SnaLin		Snap to only lines
Snap Symbols	SnaSym		Snap to only symbols
Snap Text	SnaTex		Snap to only text
Snap Point	SnaPoi, SnaPnt		Return line point
Snap Intersect	SnaInt		Return line intersection
Snap End	SnaEnd		Return line endpoint
Snap Search Line	SnaSeaLin		Snap Search Mode Lines
Snap Search Line Point	SnaSeaPoi		Snap Search Mode Line Points
Snap 2D	Sna2d		Snap 2 dimension
Snap 3D	Sna3d		Snap 3 dimension
Snap Verify Off	SnaVOff		Turn snap verify off
Snap Verify On	SnaVOn		Turn snap verify on
Snap After Off	SnaAOff		After snap, turn if off
Snap After On	SnaAOn		After snap, leave it on
Snap Ignore Fail On	SnaIOn		Ignore failed snaps allowing retries
Snap Ignore Fail Off	SnaIOff		Failed snaps return digitized position

Name	Key-in	Arguments	Description
Set Default Directory	DefDir	Directory	Sets the default (project) directory
Close All Open Files	CloAll		Closes all open VrOne and image files
New VrOne file	NewVr	[-p][-w][-t value][-u value][-c value][-s value][-z value][-d value][Filename]	Creates new VrOne file using optional arguments -p = Prompt for header -w = Don’t change active workspace -t value = Set target scale to value -u value = Set units to value (0=feet,1=meters) -c value = Set coordinate format to value (0=State Plane, 1=UTM) -s value = Set state plane zone to value -z value = Set UTM zone to value -d value = Set description to value Filename = Create file with this name. Will prompt for filename if not given.
Open VrOne file	OpeVr		Opens VrOne files from dialog box
Open VrOne file	OpeVr	File name	Opens VrOne file
Close VrOne File	CloVr		Closes VrOne files
Close VrOne File	CloVr	All	Closes all VrOne files
Save As	SavAs		Saves the Active Workspace file with the ability to rename
Pack VrOne File(s)	PacVr	All \| Cur	Packs VrOne files(s) All – Packs all open workspaces Cur – Packs the current workspace only
Sort VrOne File(s)	SorVr		Sorts and packs VrOne file(s) by the layer and the X or Y axis
Backup VrOne File	BacVr		Backs up VrOne files
Edit VrOne Header	EdiVr		Edits Vr file header
Set Passwords			Set passwords on Vr file
List Layer	LisLay		Lists Layers and modes used in Vr files
List Workspaces	LisWs		Lists Workspaces currently open. Display workspace number, file size, entity counts, and filename
Open Image	OpeIma		Opens image files from dialog box
Open Image	OpeIma	File name	Opens image file
Close Image	CloIma		Closes image files
Close Image	CloIma	All	Closes all image files
Open Model	OpeMod		Opens two images that make up a model from a dialog box
Open Model	OpeMod	File name	Opens two images that make up a model based on the model orientation (.vmo) file
Open ADS Model	OpeAds		Opens an ADS stereo model.
Model Manager	ModMan		Prompts for a VrTwo Orientation project and opens a Model Manager window displaying the models in the project.
Model Manager	ModMan	VrTwo orientation file name	Opens a Model Manager window displaying the models in the specified project.

Load Symbols	LoaSym	File name	Loads VrOne symbol file
Copy File	Copy	File1 File2	Copies disk File1 to File2
Delete File	Delete	File	Deletes disk File
Spawn	Spa	Argument List	Runs a command from the operating system
Change Units	ChaUni		Changes file units (Meters<->Feet)
Range Xy	RanXy		Shows Xy range of all open workspaces
Undo	Undo		Undoes last save or deletion operation
Exit	Exi		Exits VrOne
Quit	Qui		Exits VrOne
End	End		Exits VrOne without confirmation

Name	Key-in	Arguments	Description
Edit Toolbars	EdiToo		Allows creation and editing of toolbars and toolbar items
Digitizer Xy	DigXy		Set input device to Xy digitizer
Digitizer Xyz	DigXyz		Set input device to Xyz digitizer
Digitizer Mouse	DigMou		Set input device to mouse
Toggle Digitizer Math	TogDig		Toggle between scratch and least squares input
Load Xy Transformation	LoaXy		Load Xy transformation parameters
Z Offset	Zoff		Sets a Z offset that is applied when using XYZ input
Preset Encoders	Preset		Presets Analog instrument encoders at index point
Device Controls	DevCon		Sets device dependent controls
Device Mouse	DevMou		Sets device dependent controls for the Mouse / Stealth Mouse
Device P3	DevP3		Sets device dependent controls for the Zeiss P1/P2/P3
Device Hand Wheels	DevHan		Sets device dependent controls for VrTwo Hand Wheels
Device TopoMouse	DevTop		Sets device dependent controls for the LH TopoMouse
Device Joystick	DevJoy		Sets device dependent controls for Joysticks
Device Xy Scale Factor	DevSfXy	Scale factor 1=none	Sets the xy input scale factor for the active VrTwo 3D input device. (see note below)
Device Z Scale Factor	DevSfZ	Scale factor 1=none	Sets the z input scale factor for the active VrTwo 3D input device. (see note below)
Z Source	Zsou	ActZ \| Dtm \| ForZ	Set elevation source. No arguments will bring up dialog box.
Digitize Scratch	DigScr		Digitize scratch orientation origin
Digitizer Menu Board	DigMen		Digitize menu board location
Edit Menu Board	EdiMen		Edit menu board commands
Edit Key Pad	EdiKey		Edit key pad commands
Function Key Starter	FunKey		Starts function key starter
Edit Function Keys	EdiFun		Edit function keys
Load Cm Fkeys	LoaCad		Load and translate CADMAP function keys ASCII file
Edit Macros	EdiMac		Edit macros
Begin Macro	BegMac		Begin recording a macro
End Macro	EndMac		End recording a macro
Func Keys to Key Pad	CopKey		Copies function key assignments to key pad
Func Keys To Layer Names	FunLay		Copies function key descriptions to layer names
Write Kork Macros	WriKp3		Write Kp300 file
Read Kork Macros	ReaKor		Read KORK macro file
Convert Microstation Color Table	ConMic		Converts a Microstation Color Table (.tbl) to a Vr Mapping Color Table

NOTE: Device Scale Factors (DevSfXf and DevSfZ) - Supported devices for the scale factor commands.

TopoMouse, Stealth Z-Mouse, Stealth Hand-wheels, Immersion Mouse, ZI Mouse and DAT/EM Hand-wheels

Name	Key-in	Arguments	Description
Edit Layer Names	EdiLay		Edit layer names
Set Layers On/Off	SetLay		Conditions layers using dialog box
Change Layer	ChaLay		Interactive change layers
Layer Off	LayOff	NumLine	Turns off layers specified in number line
Layer On	LayOn	NumLine	Turns on layers specified in number line
Layer Off Plus	LayOff+	NumLine	Turns only layers specified in number line off
Layer On Plus	LayOn+	NumLine	Turns only layers specified in number line on
Layer Reset	LayRes		Turns all layers on
Snap Layer Off	SnaLayOff	NumLine	Turns snapping off for the layers specified
Snap Layer On	SnaLayOn	NumLine	Turns snapping on for the layers specified
Snap Layer Off Plus	SnaLayOff+	NumLine	Turns snapping off for only the layers specified
Snap Layer On Plus	SnaLayOn+	NumLine	Turns snapping on for only the layers specified
Snap Layer Reset	SnaLayRes		Turns snapping on for all layers
Delete Layers	DelLay	NumLine	Deletes layer(s)
Copy Layers	CopLay	NumLine TarLayer	Copies layer(s)
Move Layers	MovLay	NumLine TarLayer	Moves layer(s)
Layer Control	LayCon		Display layer control dialog

Name	Key-in	Arguments	Description
Change Pen	ChaPen		Interactive change entity pen number
Load Pen Table	LoaPen		Loads pen table. Prompts with dialog box
Load Pen Table	LoaPen	File name	Loads pen table
Load Alternate Pen Table	LoaAltPen		Loads alternate pen table. Prompts with dialog box
Load Alternate Pen Table	LoaAltPen	File name	Loads alternate pen table
Reset Pen Table	ResPen		Resets all pen numbers to 1 in the current pen table
Reset Alternate Pen Table	ResAltPen		Resets all pen numbers to 1 in the alternate pen table
Random Color File	RanCol		Random color file by changing pen numbers

Name	Key-in	Arguments	Description
Buffer Xy/Xyz Input During Replot	BufXy	0=Off 1=On	Sets the buffering of Xy or Xyz input during screen re-plotting. Digitizing may continue but re-plotting will be slower.
Replot	Rep		Re-plots graphics to all windows
Replot Off	RepOff		Turns off graphics replot in macros
Open Window	OpeWin		Open new window
Close Window	CloWin		Closes the last opened graphics window if there is more than one open window.
Toggle Roaming	TogRoa		Toggles between image static and image roaming modes (VrTwo only)
Toggle Roaming Cursor	TogRoaCur		Toggles whether main graphics window roams in VrTwo when cursor is in an overview window
Toggle Window Shift	TogWin		Toggle window shift
Set Window Origin	WinOrg	X Y Z	Sets the origin of the active window Z is optional
Set Window Scale	WinSca	Scale	Sets the scale of the active window SetSca 1200 SetSca 1=100 SetSca 1:1200
Window Rotation	WinRot		Digitize window rotation about Z axis
Window Rotation X	RotX	Rotation value	Rotate current window about the X axis
Window Rotation Y	RotY	Rotation value	Rotate current window about the Y axis
Window Rotation Z	RotZ	Rotation value	Rotate current window about the Z axis This value is expressed as Direction of North
Window Align	WinAli		Aligns Z rotation of current graphics window with window 1. Useful in VrTwo.
Zoom Filter Pixel Smooth	ZooFil PixSmo		Zoom filter mode. Used to smooth pixels when zoomed below 1:1. Without any arguments, toggles between Nearest Neighbor and Bilinear, or can be set directly as shown below. ZooFil 0 = Nearest neighbor ZooFil 1 = Bilinear (VrTwo roaming only)
Zoom Center	ZooC ZooCen		Centers the window at the current cursor location
Zoom Window	ZooW ZooWin		Zooms by user-defined window
Zoom All	ZooA ZooAll	1-8 (optional)	Places all open data into window
Zoom Fit	ZooF ZooFit	1-8 (optional)	Places all open and non-deleted data into window
Zoom Previous	ZooP ZooPre		Displays previous zoom
Zoom Last	ZooL ZooLef		Shifts the window left
Zoom Right	ZooR ZooRig		Shifts the window right
Zoom Up	ZooU ZooUp		Shifts the window up
Zoom Down	ZooD ZooDow		Shifts the window down
Zoom In	Zoo	Scale_factor window (1-8, optional)	Zooms in by user-defined scale factor. Prompts for window selection if no window number given
Zoom Out	Zoo	Scale factor	Zooms out by user-defined scale factor
Zoom Visible	ZooV ZooVis	1-8 (optional)	Zooms to the extents of the visible vector graphics and images
Plot	Plo		Hard copy plotting
Set Display Flags On	SetAll		Set all entities display flag to ON

NOTE: Care must be taken when using Window Scale (WinSca), Window Rotation X,Y,Z (WinRot), and Window Origin (WinOrg) in sequence without a screen replot. Since these key-ins are likely to be in a macro they do not redraw the graphics window. A replot (Rep) must be done to accomplish this. If two or more are used without a replot (which is likely in a macro) they must be in the following order as this example shows:

There are three conditions dealing with grid points on the screen that can be set:

Name	Key-in	Arguments	Description
Grid Set	GriSet		Sets grid display and snapping using a dialog box
Grid Display On	GriOn		Turns grid point display on
Grid Display Off	GriOff		Turns grid point display off
Grid Display Toggle	GriTog		Toggles grid point display
Grid Resolution Set	GriRes	Distance	Set grid point display resolution in ground units
Grid Type	GriTyp	0 \| 1	0 = Show grid as points 1 = Show grid as lines
Grid Snap if Displayed	GriSnaDis		Turns on grid snapping only if the grid display is on. (see Grid On)
Grid Snap On	GriSnaOn		Turns on grid snapping. The behavior of the cursor depends on the Cursor Snap setting.
Grid Snap Off	GriSnaOff		Turns off grid snapping
Grid Snap Toggle	GriSnaTog		Toggle between the three grid snapping modes shown above
Cursor Snap On	CurSnaOn		Set the cursor to move only between grid points
Cursor Snap Off	CurSnaOff		Set the cursor to move with the current input device and snap to a grid point only when a point is digitized
Cursor Snap Tog	CurSnaTog		Toggles between Cursor Snap On and Cursor Snap Off

The following keyboard key presses may be used for graphics window changes while the mouse is in the graphics window.

Name	Shortcut
Zoom Center	Home Key
Reload Graphics	Home Key (VrTwo roaming only)
Zoom Last	Left Arrow Key
Zoom Right	Right Arrow Key
Zoom Up	Up Arrow Key
Zoom Down	Down Arrow Key
Zoom In	Page Down (2x)
Zoom Out	Page Up (2x)
Disengage Roaming	Insert Key (VrTwo roaming only)
Shift->PgUp	Zoom up two pyramid levels (VrTwo roaming only)
Shift->PgDn	Zoom down two pyramid levels (VrTwo roaming only)
Ctrl->PgUp	Zooms to top pyramid level (VrTwo roaming only)
Ctrl->PgDn	Zooms to bottom (1:1) pyramid level (VrTwo roaming only)
Toggle Cursor Mask	Delete Key (VrTwo only)
Disengage Mouse to Stereo Motion	Shift Key (VrTwo static only)
4x Z Motion Multiplier	Shift Key (VrTwo only)

Name	Key-in	Arguments	Description
Display Image	DisIma	0.5	Display image at .5 to 1 pixel resolution
Display Image	DisIma	1	Display image at 1 to 1 pixel resolution
Display Image	DisIma	2	Display image at 2 to 1 pixel resolution
Display Image	DisIma	4	Display image at 4 to 1 pixel resolution
Display Image	DisIma	8	Display image at 8 to 1 pixel resolution
Pixel Compute	PixCom		Computes image pixel size and file size
Image Control	ImaCon		Set contrast/brightness of image to file or plotter
Image Flicker	ImaFli		Alternately displays two images (image flicker)
Toggle Image Edges	TogImE		Toggles the display of image information such as edges and image names
Image Display Mode	ImaDis	0-2	Sets the display mode for images. 0–Draw 1-XOR 2-OR
Image Clean	ImaCle		Removes scratches from images
Image Levels	ImaLev		Display Image Levels dialog allowing color levels to be adjusted on open images
Set Brightness	SetBri	Brightness (0-100, 50 = default)	Set brightness level of images
Set Contrast	SetCon	Contrast (0-100, 50 = default)	Set contrast level of images
Set Brightness and Contrast	SetBriCon	Brightness Contrast (0-100, 50 = default)	Set brightness and contrast level of images

NOTE: Videomap must be configured in the Vr Configuration program (VrCfig) for Videomap commands to be recognized.

Name	Key-in	Description
Batch Attach	BatAtt	Attaches source line end segments to target lines
Batch Areas	BatAre	Changes layer and graphic pointer of line entities based on the line’s area
Batch Common	BatCom	Processes common and orphaned node points between lines
Batch Depression Contour	BatDep	Identifies depression contours based on raw DTM data
Batch Direction	BatDir	Changes direction of lines
Batch Filter	BatFil	Filter lines with tube, distance
Batch Flow	BatFlo	Forces lines to flow in one direction
Batch Grid	BatGri	Creates grid points based on existing VrOne data
Batch Join	BatJoi	Joins lines within and between workspaces
Batch Node	BatNod	Nodes lines in workspaces
Batch Offset	BatOff	Offset lines
Batch Smooth	BatSmo	Smoothes lines and places points in file
Batch Trim	BatTri	Trims lines to lines or text
Bump Elevations	BumEle	Changes points within contour intervals
Change Text Elevations	ChaTez	Change text elevations
Clear Polygons	ClePol	Clears or modifies lines inside polygons
Delete Arc Flags	DelArc	Delete line arc flags
Drape	Drape	Drape entities over DTM or lines with wall ability
Delete Node Flags	DelNod	Deletes line node flags
Delete Close Points	DelClo	Deletes points within a distance of lines
Delete Contours	DelCon	Delete contour intervals
Delete Duplicates	DelDup	Delete duplicate entities
Delete Duplicate Segments	DelDupSeg	Delete duplicate segments
Delete Points In Polygons	DelPoi	Delete points in polygons
Delete Outside Boundary	DelOut	Delete entities outside boundary line
Delete Short Lines	DelSho	Delete short line segments
Fix Arcs	FixArc	Places arc flags on lines
Gap Lines	GapLin	Places gaps where lines touch
Global Change	Glob	Line, Symbol, Text global change
Image Merge	ImaMer	Merges multiple images into a single file
Label Symbol Elevations	LabSym	Labels elevations on symbols
Line Cross	LinCro	Find crossing lines
Line Cross Z	LinCrz	Checks the Zs of common points on crossing lines
Line Close	LinClo	Closes or checks for closure of lines
Line Point Inside	LinPoi	Checks for the existence of symbols and (or) points within lines
Segment Lines	SegLin	Convert lines into individual 2 point segments.
Make Polygons	MakPol	Makes closed polygons using existing line segments and centroids
Merge Files	Merge	Merge multiple VrOne files into current workspace
Load DTM Parameter File	ParFilDtm	Loads DTM parameter file from key-in which will be in effect for subsequent DTM processing
Place Symbols	PlaSym	Place symbols on entities
Round Elevations	RouEle	Round elevations to nearest value
Run Dtm	RunDtm	Runs Dtm
Search Elevation	SeaEle	Searches elevation range and changes entities layer
Set Dtm	SetDtm	Sets Dtm parameters
Set Elevation	SetEle	Sets elevation of specified layer(s)
Sheet Layout	SheLay	Sheet Layout
Shift Workspace	ShiWs	Shifts workspace(s) in Xy and or Z
Swap Axis	SwaAxi	Swaps coordinate axis
Tile Points	TilPoi	Tiles VrPoints (LiDAR) from multiple VrOne files and creates new VrOne files.
Transform Workspace	TraWs	Performs 2D transformation of workspace(s)

Name	Key-in	Arguments	Description
Load DTM Parameters	LoaDtm	File name	Loads DTM parameter file which will be used for the next RunDtm
Run DTM	RunDtm		Runs DTM based on current parameters
Manage DTM	ManDtm		Manage multiple DTM surfaces and perform volume calculations.
Free DTM	FreDtm	Surface #	Free DTM surface from memory
Quick DTM	QuiDtm		Run contours from last saved surface file.
Load Surface	LoaSur	File name	Load a DTM surface into memory
Clear Surface	CleSur		Clear active DTM surface from memory
Set User DTM Area	SetUdt		Allow user to select new User-Defined Area
Show User DTM Area	ShoUdt		Display temporary white line on the graphics window showing current User-Defined area shape
Drape			Drape entities to current DTM surface
Isolate DTM Layers	IsoDtm		Turn off all layers except those specified in the current DTM points and break lines parameters

Name	Key-in	Description
Break Line	BreLin	Break line
Change Elevations	ChaEle	Change elevations to Z Source elevations
Change Graphic Pointer	ChaGra	Change graphic pointer
Classify 3D	Cla3D	Classifies, changes layer or deletes VrPoints (LiDAR) based on shapes in a 3D stereo environment.
Copy Window	CopWin	Copy window
Copy Polygon	CopPol	Copy from user-defined polygon
Move Polygon	MovPol	Move from user-defined polygon
Cut Sheet	CutShe	Cuts vector/image data against sheet lines
Cut Polygon	CutPol	Cut from a user-defined polygon
Cut Window	CutWin	Cuts from a user-defined window
Delete Window	DelWin	Delete window
Edit Elevations	EdiEle	Edit elevations
Edit Line	EdiLin	Edit line
Edit Point	EdiPoi	Edit VrPoint entities
Explode Line	ExpLin	Explodes fonted line(s) into individual lines
Edit Symbol	EdiSym	Edit symbols
Explode Symbol	ExpSym	Explodes symbol(s) into lines
Edit Text	EdiTex	Edit text labels
Explode Text	ExpTex	Explodes text into lines
Fast Delete	FasDel	Fast delete
Hack Line	HacLin	Hack line
Hatch Line	HatLin	Hatch line or layer(s)
Inherit	Inh	Copies entity properties
Join Lines	JoiLin	Join lines
Move Window	MovWin	Move window
Polygon Elevation	PolEle	Change elevation of symbols inside polygons
Reverse Line	RevLin	Reverse line(s)
Grid Line	GriLin	Grids line(s)
Tick Line	TicLin	Ticks line(s)
Slope Line	SloLin	Slopes lines based on two existing points
Square Existing Lines	SquExi	Squares existing line(s)
Trim Lines	TriLin	Trim lines
Line Lines Intersect	LinLin	Line to lines intersection

Name	Key-in	Description
Correlate Area	CorAre	Places points on the ground in user-defined area
Create Symbols	CreSym	Create symbol
Manage Symbols	ManSym	Displays and manages symbols and line fonts
Drive Grid	DriGri	Drive to grid and place points
Insert Fly Line	InsFly	Insert fly line
Insert Line	InsLin	Insert line
Insert Line Text	InsLte	Insert line text
Insert Parallel Line	InsPar	Insert parallel line
Insert Multiple Parallel Line(s)	InsMul	Insert multiple parallel line(s)
Insert Squared Line	InsSqu	Insert squared line
Insert Orthogonal Line	InsOrt	Insert orthogonal line by reading line segments
Insert Orthogonal Corner	InsOrc	Insert orthogonal line by reading polygon corners
Insert Symbol	InsSym	Insert symbol
Insert Text	InsTex	Insert text
Interpolate Contours	IntCon	Interpolates contours between two existing contours
Label Point	LabPoi	Label point with Xy and or Z
Digitize Control	DigCon	Digitizes coordinate points into a control file
Plot Control	PloCon	Plot control
Point On Line	Pol	Places a point on line on an existing line
Scan P3	ScaP3	Drives the Zeiss P-Series stereoplotters along profile lines
Sheet Grid	SheGri	Sheet grid
Symbol Fill	SymFil	Fills polygon with symbols with drape option
Insert File	InsFil	Insert a VrOne file into the current workspace

VrLiDAR is the integration of LiDAR data and processing into the Vr Mapping software, specifically VrOne and VrTwo.

Although any key-in may be placed the a macro, the following commands are useful when programming macros.

Name	Key-in	Description
ASCII Out	AscOut	VrOne to ASCII list
ASCII In	AscIn	ASCII list to VrOne
Dxf In	DxfIn	Drawing Exchange Format to VrOne
Dxf Out	DxfOut	VrOne to Drawing Exchange Format
Cm2Vr	Cm2Vr	CADMAP to VrOne (External program)
Vr2Cm	Vr2Cm	VrOne to CADMAP (External program)
MicroStation Out	MstOut	VrOne to MicroStation
MicroStation In	MstIn	Microstation to VrOne
Shape Out	ShpOut	VrOne to ArcView Shape file
Shape In	ShpIn	ArcView Shape file to VrOne
DSFL Out	DsfOut	VrOne to Danish DSFL format
DSFL In	DsfIn	Danish DSFL format to VrOne
LAS Out	LasOut	VrOne Points to LAS format (VrLiDAR)
LAS In	LasIn	LAS format to VrOne Points (VrLiDAR)
Points Out	PoiOut	VrOne Points to ASCII Points files (.pts) (VrLiDAR)
Points In	PoiIn	ASCII Points files (.pts) to VrOne Points (VrLiDAR)