Stealth Z-Mouse / Stealth Hand Wheels

Vr Mapping

ON-LINE REFERENCE DOCUMENTATION

CARDINAL SYSTEMS, LLC

www.cardinalsystems.net

The Stealth Z-Mouse is a free-hand device for moving the cursor in the XYZ directions in VrTwo. Two sizes are available; the S1 Z-Mouse and the S2 Z-Mouse. The S1 Z-Mouse is the larger form factor. Features include a mouse-style optical movement sensor for the XY movements and a Z-wheel for Z movements. 18 user definable buttons are available. The VrOne Stealth Z-Mouse driver allows any button to be programmed to emit a predefined VrOne key press from 0 to 11 or any VrOne key-in which may include key-ins, macros and (or) function keys.

The Stealth Handwheels include two high-precision XY handwheels along with a Z foot disk. Also include are three-pedal footswitches. The Stealth Z-Mouse and the Stealth Handwheels share the same driver in interface.

The Z-Mouse differs from the original Stealth 3D Mouse in that it does not configure as a Windows mouse so when in operation the Windows mouse may be used for normal operations such as pulling down menus etc.

For more information about the Stealth 3D Mouse line of products including the Stealth Z-Mouse please the Stealth International web page. Stealth International provides a wide range of 3D input devices and offers sales and support of these products.

The Stealth Z-Mouse and Hand Wheels are connected to the computer via a standard USB (Universal Serial Bus). Power is supplied from the USB interface and an AC adapter is not needed.

Plug your mouse or hand wheels into the USB Port. Windows Plug and Play will normally pop up to ask for a disk. Insert the CD provided into your CD reader, and tell Windows that you have a disk. Installation should be automatic. If it does not install automatically, run Control Panel/Add new hardware, and manually install the driver, indicating the CD drive and directory.

The drivers for the Stealth Z-Mouse may be loaded from the Stealth 3D Mouse web page at http://stealth3dmouse.com/ under Drivers. If the drivers are downloaded from the web site then a CD is not needed for installation.

2. Un-compress the Stealth driver files and placed the contents into the C:\Stealth folder. If this folder does not exist then create it before un-compressing the driver file.

3. Plug in Stealth USB cable. Windows 7 does not offer the installation dialog that Windows XP does. (see step 4)

4. Start Device Manager (Click Start button -> Type "Device Manager" in search box -> Click Device Manager). Right mouse click "Stealth Z-Mouse V01" -> Select "Update Driver Software"

7. Repeat steps 4-6 to install drivers from the USB Serial Port. Substitute "USB serial port" for "Sealth Z-Mouse V01".

Vr may be configured to use the Z-Mouse or Handwheels from the Vr Configuration program (VrCfig). From the Configuration pull-down, the “VrTwo 3D input” item may be selected which will bring up to following dialog box.

•	A VrOne button press with a value from 0 to 11 (b0-b11). Button press 10 is the Vr * key, button press 11 is the 0 key (used to condition snap) and button press 11 is the # key which is normally used to terminate a VrOne application.

•	Any valid VrOne key-in. These key-ins may include a VrOne key-in, Macro or Function Key. Multiple key-ins may be placed on a single key up to 64 characters.

To configure button assignments the Input->Device Controls->Stealth Z-Mouse may be selected or type DevSzm (Device Stealth Zmouse) while in VrOne or VrTwo.

There are ten user definable mouse buttons available on the Stealth Z-Mouse. If one of the Mouse Buttons are assigned as a Clutch/Shift button then the Shift Mouse Buttons are available for assignment. In the dialog box displayed above, the right columns contain the user-defined key definitions that will be executed when the button is pressed. All button assignments will emit a command when the button is pressed and will not emit another until the button is raised and pressed again.

•

Clutch (Shift) – When pressed, the XY motion of the Z-Mouse are disconnected. The Clutch / Shift button can be placed on any Mouse Button 1 through 10. It is not recommended to use more than one Clutch button. If more than one is used then one Clutch button cannot act as a Shift button to the other. The button that the Clutch/Shift function is assigned cannot be shifted. For example; If the Mouse Button 1 is assigned as a Clutch/Shift key then the Shift Mouse Button 1 assignment will be ignored.

Assigning VrOne Key-ins - VrOne key-ins may be placed on any key simply by typing the desired VrOne command or commands up to 64 characters. Multiple commands are separated by a comma. For example;

Could be entered which would perform a Zoom All then run the SetLayMacro macro then start the RoadFuncKey function key. Of course, SetLayMacro and RoadFuncKey are defined by the user.

The Read divisor may be set to slow down the input from the mouse with 1 being the fastest setting.

This parameter sets the scale factor of XY input from the mouse. A value of 1 is no scale factor. A negative number reverses the direction of the motion.

This parameter sets the scale factor of Z input from the mouse. A value of 1 is no scale factor. A negative number reverses the direction of the motion.

Any foot switch on the Hand Wheel Foot Switch may be programmed to emit one of the following:

•	A VrOne button press with a value from 0 to 11 (b0-b11). Button press 10 is the Vr * key, button press 11 is the 0 key (used to condition snap) and button press 11 is the # key which is normally used to terminate a VrOne application.

•	Any valid VrOne key-in. These key-ins may include a VrOne key-in, Macro or Function Key. Multiple key-ins may be placed on a single key up to 64 characters.

To configure button assignments the Input->Device Controls->Stealth Handwheels may be selected or type DevSha (Device Stealth Handwheels) while in VrOne or VrTwo.

The Foot switch button numbers are displayed in the left column and reference the Z-Mouse buttons as shown in the image above. The right columns contain the user-defined key definitions that will be executed when the button is pressed.

All foot switch assignments will emit a command when the button is pressed and will not emit another until the button is raised and pressed again.

Assigning VrOne Key-ins - VrOne key-ins may be placed on any key simply by typing the desired VrOne command or commands up to 64 characters. Multiple commands are separated by a comma. For example;

Could be entered which would perform a Zoom All then run the SetLayMacro macro then start the RoadFuncKey function key. Of course, SetLayMacro and RoadFuncKey are defined by the user.

The Read divisor may be set to slow down the input from the mouse with 1 being the fastest setting.

This parameter sets the scale factor of XY input from the mouse. A value of 1 is no scale factor. A negative number reverses the direction of the motion.

This parameter sets the scale factor of Z input from the mouse. A value of 1 is no scale factor. A negative number reverses the direction of the motion.

VrOne/VrTwo allows interactive input from 12 buttons. These Vr Buttons are assigned to the system keyboard F1 - F12 keys and may be assigned to buttons on input devices such as the Stealth Z-Mouse. The b0-b11 button assignments correspond to VrOne button presses 1-12 as shown in the Insert Line example above. Following are the b0-b11 assignments.